Cat Knock Zone Warning Sign
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Warn others that drinks left on tables are not safe!
- Ocena
- 5 / 5
- Polubienia
- 128
- Pobrania
- 341
- Wydruki
- 6
- Wyświetlenia
- 950
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial
Came across this outstanding graphic and decided it needed to be turned into a fridge magnet.
Design
Loaded the artwork (I believe I originally found it on MyStickerMania) as a PNG into Adobe Illustrator, traced it, exported it as an SVG, imported the SVG into Fusion 360 as a sketch, extruded the base and the art, then added pockets for 8x3mm magnets. I'm including the F3D for anyone that wants it.
Slicing
Sliced in PrusaSlicer 2.5.0 for a 0.4mm nozzle and 0.2mm layer height. Added a print pause for placing the magnets and then a color change. Also turned on ironing for the artwork. The provided 3MF file includes the print pause, color change and settings. Just be sure to open it as a project ( File → Open Project… ) instead of inserting it into a blank project.
If you slice it yourself you may need to move the pause and color change around depending on your layer height.
Printing
No supports needed (it's flat after all). Any material should work although PLA will probably be the easiest to get nice crisp lines on the artwork. I'd recommend a 0.4 or even a 0.25 mm nozzle for best results.