Zumo 350/390 LM Upper cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
After my Zumo had the rubber cover dissolved after 7 years of external use, I made this to protect from the rain Obs.:…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 265
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
After my Zumo had the rubber cover dissolved after 7 years of external use, I made this to protect from the rain
Obs.: Like the internal button of power on/off is made of the same rubber, this project isnt made to make it work, just to protect it from water (at least for me it didnt work
PS.: I used superglue after sandind both surfaces, and it worked.
PS2.: Added a prototype to make it touch the internal button, but it didnt work for me
Print Settings
Printer Brand:
Creality
Printer:
Ender 5
Rafts:
No
Supports:
No
Resolution:
0.4 mm
Infill:
40%
Category: Electronics