1 / 3
Flywoo LR4 adapter for Walksnail vtx and antennas
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made some parts to fit the new Avatar system on the Flywoo LR4.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 72
- Wydruki
- 0
- Wyświetlenia
- 634
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
All model are printed in TPU.
Print the VTX support, put 4 bolts in the exhagonal space, fix the VTX with M2 screws and fix the group to the frame.
Fix the GPS mount to the back with 2 screws, and use only 1 of the original 2 vertical spacer.
Fix the antennas mount on the rear-top .
