X5SA Z-Rod 3mm 2pc Spacer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made a 2-piece spacer for the z-rods on the X5SA, inspired by Matthew Sitton's design.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 30
- Wydruki
- 1
- Wyświetlenia
- 276
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
I made a 2-piece spacer for the z-rods on the X5SA, inspired by Matthew Sitton's design. i made it all from scratch, but i pretty much stole the original idea from them and split it in half so i didn't half to take the printer apart.
Print the parts in anything you really want but ABS is probably your best bet. print the parts with the meeting ends on the build plate so you don't need supports. the first layer is small so use a brim or a raft if need be.
use 8 M3x10 or longer and 8 M3 Nuts to attach the two together.