Prusa Mini Temptower for PLA, PETG and ABS
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the well known Temptower from Tronnic as .3mf to load into PrusaSlicer as well as sliced and ready for the…
- Ocena
- 4,868 / 5
- Polubienia
- 340
- Pobrania
- 8059
- Wydruki
- 53
- Wyświetlenia
- 21 312
- Oceny
- 68
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Public Domain
This is the well known Temptower from Tronnic as .3mf to load into PrusaSlicer as well as sliced and ready for the Prusa Mini. Just print the gcode.
All gcodes were created with PrusaSlicer 2.2.0 using
-) PrinterSetting: "Prusa Mini" without changes
-) Filament Settings: "Generic PLA", "Generic PETG" and "Generic ABS" without changes
-) PrintSettings: "0.20mm Speed" without changes
Edit 15.08.2020
Added the 3mf files
Edit 29.09.2020
Thanks for all your comments. I uploaded now the updated and correct .3mf files with the sliced .gcodes.