Meaco DD8L Junior Dehumidifier Wall Mount Brackets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall Mount Brackets for the Meaco DD8L Junior Dehumidifier To fit do the following; 1) Remove the 4 screws from the…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 459
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Wall Mount Brackets for the Meaco DD8L Junior Dehumidifier
To fit do the following;
Remove the 4 screws from the floor mount and remove it.
Attach the bottom brackets to the bottom of the Dehumidifier using the original screws.
Hold up to the wall making sure it is level and mark the 4 holes for the wall screws.
Remove the brackets again and drill and affix it to the wall using the screw holes in the brackets (use appropriate wall fixings).
Once secure align the screw posts onto the brackets and use the original screws to affix the Dehumidifier back to the brackets.
Align the Top Tabs to the top lip of the Dehumidifier and affix to the wall.
I printed with PLA at 0.2mm with 60% infill with support.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
Yes
Resolution:
0.2mm
Infill:
60
Filament: Eeyone PLA Carbon Black
Category: Household