Stronger Onefinity CNC Suckit Dust Shoe Arm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Custom designed Suckit dust shoe (dust boot) arm(s), specifically for the Onefinity CNC
- Ocena
- 5 / 5
- Polubienia
- 26
- Pobrania
- 311
- Wydruki
- 1
- Wyświetlenia
- 1655
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- GNU General Public License v2.0
Custom designed Suckit dust shoe (dust boot) arm(s), specifically for the Onefinity CNC, but should work for other manufacturers.
This arm has been made stronger to support the larger model of dust shoe that uses a 4" hose found here:
https://www.thingiverse.com/thing:3912413
And to also allow dust shoes to slide as far back as needed in the Y-axis direction because there is no hard stop at either end of the channel.
To print the right-side arm, just do a Mirror on the Y axis inside the slicer.
Requires four 6mm x 3mm neodymium magnets.
Includes 3D model, .3mf file that I used for printing, and the FreeCAD 20.x design file.
Supports would be highly suggested unless your printer can handle a few millimeter overhang.