iPhone 7/8/SE Card or Wallet Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Yet another iPhone case but my twist is that this one holds 2 credit cards on the back.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 131
- Wydruki
- 1
- Wyświetlenia
- 993
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Public Domain
Yet another iPhone case but my twist is that this one holds 2 credit cards on the back. Cards slide out through the bottom and you can push them through the thumb hole. I have found that it helps to have a bill between the cards and the phone to provide a bit of friction (and it is nice to have some emergency cash).
I have attached the Fusion 360 file and I apologize in advance, I used this to learn more about Fusion and it shows in how the final file ends up.
Also, you may want to trim the case a bit to get it just how you like it but it is a very snug fit on the phone.
Should fit the iPhone 7/8/SE (and similar) but I have only tested on the 8.
I offer no guarantees about the protection this offers but it has survived a bump or two from me.
Print instructions
I recommend PETG as it is a bit more flexible because this is a super tight print. If you can print FLEX really well that would work very well. Also will need supports in the corners.