Diy OverHead Camera Rig - Feet/Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple feet/stand to create an affordable diy camera rig for a small camera or your smartphone!
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 476
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hello! I made this model in order to create an overhead camera rig that I am working on!
at the moment, I am still working on other aspects of the rig but I can release these feet to the public. The diameter is designed for a dowel with a 5/8 inch diameter (~16mm). It will be a snug fit so you'll have to twist as push the dowel through. If you don't like to struggle a bit, I did include the original cad file so you can modify it to your liking :) Just be sure to credit me as the original creator. Thank you!
As always, if you have questions or comments. Put them under this post and i'll be sure to check them out as soon as I can!