Wooden Bench
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed this simple bench so that one of the figures I printed could take a nice little break.
- Ocena
- 5 / 5
- Polubienia
- 72
- Pobrania
- 574
- Wydruki
- 8
- Wyświetlenia
- 1895
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
You can scale this to your needs; it is currently sized to around 350mm wide, 120mm deep, and 105mm tall. Assembly is straightforward. I used glue to hold the boards in place in the supports. I printed the boards in a wood PLA and then stained them. To print this model, you need to print 2 Bench Braces and 3 Bench Boards.
To make the boards sturdy, I printed the boards with 20% infill and thick walls.
Not sure this will scale to a very small size well, but if you try it, leave a comment and let us know how it went. You can shorten the bench by shortening the length of the boards in your slicer; you may not want to make them longer, not without adding a 3rd brace in the middle.
Enjoy, and please share your makes!