Linear Insulator for KLM KT34 Antenna
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A friend reached out to me as they knew someone who needed replacement linear insulators for an antenna they were…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 47
- Wydruki
- 0
- Wyświetlenia
- 486
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
A friend reached out to me as they knew someone who needed replacement linear insulators for an antenna they were trying to repair. I was provided with a single insulator, which was cracked due to weather and age, and from this I was able to use a caliper and generate something resembling this insulator.
The top ring is a bit thicker than the actual model as it seemed that was where the cracking had occurred. I have printed a batch of them out of PETG material at about 80-90% infill. They have not been installed as of yet, but we will see how well they weather!
You can find a copy of the manual (as well as a better representation of the part) here: http://www.hamanuals.com/MMans/KLM83.pdf
Print instructions
Print Settings
Printer: Wanhao Duplicator 4
Rafts: No
Supports: No
Resolution: .2mm
Infill: 80-90%