Oculus Rift Sensor Case / Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple case/cover for the Oculus Rift sensors, mostly just to change the color to match the walls
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 181
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Virtual Reality
- Licencja
- Creative Commons — Attribution — Share Alike
To blend in a bit better with my white walls, I designed a simple case/cover for the Oculus Rift sensors that cover the black exterior. It also include an optional dust cover for the lens.
Or, print in a different color just for fun.
Simply slides/snaps onto the sensor and holds securely. It has somewhat tight tolerances, so make sure your printer is calibrated, and it has wall thicknesses designed for a 0.4mm nozzle.
Photos also include this corner mount (not made by me): https://www.thingiverse.com/thing:2574630
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.25
Infill:
0%
Filament: Hatchbox PLA White
Notes:
Prints best with 0.4mm nozzle and 0.42-0.45mm extrusion width.
Print on the "back" of the sensor which has a lip to prevent sliding off the sensor, and gives a better print surface.Carefully cut the very tiny notch post-printing to separate the slot down the cylinder, and slide it onto the sensor starting from the back of the sensor.
Category: Computer