Kohlebürstenhalter Kappe AEG Bürstenhalterkappe Brush holder cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed a brush holder cap for my old belt sander (the carbon brush was defect). As there was nothing to buy online…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 97
- Wydruki
- 0
- Wyświetlenia
- 427
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
I needed a brush holder cap for my old belt sander (the carbon brush was defect). As there was nothing to buy online (except some chinese seller, which would take a month to deliver) I tried to create one.
This is the result. May it help others to repair their old machines (=
Printed with 0.10mm and 70% infill with standard PETG (took 22m to print). I guess PLA and less infill also works.
Doesn't need any support.
UPDATE: Don't print this with PETG or PLA as mentioned above. After a while this cap got melted down, cause of the heat from the belt sander. Use Nylon, ASA, ABS or PC instead, cause it's more heat resistant.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.10
Infill:
70%
Filament: Nylon, ASA, ABS, PC