Mean Well RS-150-12 mounting brackets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I searched for an underside mounting bracket for the Meanwell RS-150-12, when I found Sefanja's LRS-150-12. The…
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 45
- Wydruki
- 1
- Wyświetlenia
- 404
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
I searched for an underside mounting bracket for the Meanwell RS-150-12, when I found Sefanja's LRS-150-12. The measurements of the LRS-150-12 are very similiar, but still different (the RS-150-12 has more height). So I decided to remix this version.
The Mounting bracket is designed for the following dimensions:
98x38mm (WxH)
The Length is unimportant, as you can just add as much brackets as you want.
I also designed an "End Bracket" it has a small extra line to keep the power supply from moving to the left or right.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0,2
Infill:
15
Filament: Sunlu PETG / PLA