Tiny Raspberry Pi Zero Case with Antenna
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
About the case: This is a new and very compact case for my Zigbee to MQTT gateway It is locked via a 15mm M3 screw It…
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 25
- Wydruki
- 1
- Wyświetlenia
- 760
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
About the case:
- This is a new and very compact case for my Zigbee to MQTT gateway
- It is locked via a 15mm M3 screw
- It can be mounted to a wall
- It has ventilation holes
Size: 19 65 100 mm
Additions:My old design is called Round Raspberry Pi Zero Case.
- The software I used for the gateway is on GitHub
Print instructions
Category: Electronics Summary
About the case:
- This is a new and very compact case for my Zigbee to MQTT gateway
- It is locked via a 15mm M3 screw
- It can be mounted to a wall
- It has ventilation holes
Size: 19 65 100 mm
Additions:My old design is called Round Raspberry Pi Zero Case.
- The software I used for the gateway is on GitHub
Print Settings
Printer Brand: Prusa
Printer: I3 MK3S
Rafts: No
Supports: Yes
Resolution: 0.2mm
Infill: 20%
Filament: Any PLA White
Notes:
Bottom Part:
Simple to print and does not need any support
Top Part:I printed it with the pattern facing down. I used support and added a 1mm brim. The removal of the support afterwards needs patience!
- I included a modified top stl with support structure for bridges in case you like to print the part with the pattern facing up. Use the support with the option "No support for bridges".