SLS Launch Tower (designed for Kmobrain's SLS model)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replica SLS Launch Tower designed to drop in the Kmobrain SLS model at 150% scale
- Ocena
- 5 / 5
- Polubienia
- 68
- Pobrania
- 312
- Wydruki
- 0
- Wyświetlenia
- 2352
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution — Noncommercial
This launch tower is my own original design meant to replicate the real SLS launch tower. This was designed to accept the Kmobrain SLS rocket model printed at 150% scale as a drop-in on the base. The segments are all designed to press fit, some light use of superglue is recommended to hold the assembled tower together. Printing all pieces takes several days and uses about 1kg of material. I have not tested whether this model can be scaled down and printed to work with the default size of the Kmobrain SLS rocket. Please leave a comment with your results if you give it a try!
Recommended print settings:
- Supports recommended for the 3 larger truss pieces, the base, and the water towers.
- 0.2mm or 0.25mm layers
- The base will be easier to print in an enclosure to prevent warping.
Link to Kmobrain SLS Rocket model: https://www.printables.com/model/158724-sls-block-1-multi-parts-1200