Harbor Freight StoreHouse Parts Bin (parametric)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small divided bin with label for Harbor Freight's StoreHouse parts storage.
- Ocena
- 0 / 5
- Polubienia
- 84
- Pobrania
- 321
- Wydruki
- 1
- Wyświetlenia
- 2897
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
I found a number of parts bins for the Harbor Freight Storehouse Parts Storage Case but I didn't like the feet and I wanted them with a label ledge and dividers. So taking inspiration from GridFinity and wanting to learn Fusion360 (trying Onshape next) I created these.
The User Parameters in Fusion360 say 1mm but I used them as “units” as noted in the comments for the BodyWidth and BodyLength. The body width is the narrow unit of the two and a “medium” bin is two units wide with the same length and the “large” bin is 2 units in both length and width.
I printed these on my Mini with a 0.06mm nozzle and sized the thickness accordingly so these are thicker than stock and very durable (they bounce… unfortunately so do the nuts and bolts).
I also included a version with just a label ledge but I don't have the step file for that. I still need to learn how to make optional pieces in Fusion360 to toggle bits on and off in the part.