1 / 2
Toyota FJ Cruiser Custom 4WD Shift Lever
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement for the OEM 4WD shift lever.
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 94
- Wydruki
- 0
- Wyświetlenia
- 759
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (21)Powiązane
Note:
There are two different versions, one with TRD marking on top and one is without.
Background:
My 4WD shift lever was making an annoying rattling noise, turns out I over-tightened it and something broke inside. With the lever's vibration while driving, it will make an unbearable rattling noise.
Decided to 3D print a replacement, and it turned out great. Especially with higher infill % as it is denser and absorbs the vibrations better than the OEM.
Print Settings:
- Material: PETG (or other tough materials that handle heat/pressure)
- Layer Height: 0.2 mm
- (optional) Parameters: 6 mm
- Infill: 20% or more
- Infill Pattern: Gyroid (I used this, but up to you)