DIY DREMELL BRUSHLESS
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This project involves using a commercial PVC pipe; for the creation of a portable dremel; Use the attached pdf for the…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 370
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This project involves using a commercial PVC pipe; for the creation of a portable dremel;
Use the attached pdf for the number of parts to be printed and the size of the screws;
A 185W 750KV brushless motor was used to have more torque at low revs;
I used it enough and I must say that it is very functional and powerful;
Surely design can be improved.
I use a 4S lipo.
Here are some links to the main components.
Pay attention to the PVC pipe otherwise the printed support will not adapt (you can scale if desired)
View 3D online:
Post-Printing
Category: Hobby