1 / 6
Happy Birthday Card - Add the name & age with Felt Tip Pen — zdjęcie 1
1 / 6

Happy Birthday Card - Add the name & age with Felt Tip Pen

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This pocketed Happy Birthday Card is made with one print, including the working hinge. The battery lasts about a month.

Ocena
0 / 5
Polubienia
6
Pobrania
57
Wydruki
0
Wyświetlenia
720
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Public Domain

This card prints altogether.  The hinge has about 0.5mm clearance and works nicely.  

The LED and battery are held in place with a built-in spring design.  The LED battery lasts a month or more.

The LEDs come pre-soldered with a resistor built-in from Amazon.  The wires are insulated to near each end.  Place the gold wire on the (+) side of the battery.  The wires are a bit too long, so I cut them and sanded off 1" of the insulation.  Then, curled each end in a circle, placed the wires on top and bottom of the battery and slipped the assembly in the recess under the spring with the LED in the back of the candle flame.  

There is an inside pocket for a check, cash, trading card …. 

There is a 0.4 mm thick support printed for the spring, which can be easily ripped off.

The front is my attempt to depict a birthday cake, icing, and lighted candle.  Oh well.

I plan to publish a blank greeting card (less Happy Birthday/candle) with a pocket that you can modify with felt tip pen/s to provide any greeting.

Parts from Amazon:

   Battery:  CR2032 $19 for 100 pieces

   LED:  Bowerful, white, 25 pieces for $9

Tagi