1 / 6
French Cleat Pipe/Tube Holder for organizing Barstock — zdjęcie 1
1 / 6

French Cleat Pipe/Tube Holder for organizing Barstock

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I use these clamps to hold metal barstock in 50mm regular PVC pipes. PETG print tested up to about 8kg.

Ocena
5 / 5
Polubienia
28
Pobrania
78
Wydruki
2
Wyświetlenia
526
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Public Domain

I thinks the pictures speak for themselves to show what this is :). 

The FreeCad model is adjustable (within reason) by just typing in the parameters in the table named “D” for dimensions.

You will need a 50x4.0mm wood screw to close the clamp. I recommend printing in PETG but PLA should also be fine.

Slicing advice:

  1. switch off supports
  2. increase perimeters setting until the clamping ring is completely filled

Obvious printing advice:

  1. use bigger nozzle
  2. print batches

Enjoy.

See it in action here:

Tagi