Spinning Game Caddy (Quacks of Quedlinburg compatable)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here is a design to store little game bits that you place or mount on a lazy susan.
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 71
- Wydruki
- 0
- Wyświetlenia
- 2000
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A 3D print designed to be mounted on top of a lazy susan or can be mounted directly to the spinning hardware turning the disk into the spinner. It is primarily designed for Quacks of Quedlinburg but can be used for a variety of different games that have a lot of bits and pieces.
Design tolerances are VERY VERY tight so make sure your printer is not elephant footing the bottom of your prints or the hexes won't fit in perfectly.
I have included the extra chip holder as well for those who used the nickel capsules.
You will need a large printer since the disk has a diameter of 290 mm.