Ultraball Piggy Bank
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy to print and assemble ultraball shaped piggy bank
- Ocena
- 5 / 5
- Polubienia
- 103
- Pobrania
- 302
- Wydruki
- 1
- Wyświetlenia
- 1410
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
The third design of the series! You can see my others here: Pokeball, Greatball, & Masterball
This is probably the harder one of the main 4 to print. The yellow insert does in fact fit perfectly in the slot of the top, you will just have to hold it in place while the glue sets and dries a little.
As always, made to be printed without supports. I just strongly recommend printing the yellow insert at a snail pace for the first 6-7 mm with good bed adhesion.
If you'd like to help me out or have permission to sell physical items from my designs, please join my club!
Recommended print settings:
- 0.2mm layer height (0.16 for yellow insert)
- Slower speed for first 6-7mm for bottom and yellow insert pieces
- 3 perimeters
- 10% infill
- NO SUPPORTS NEEDED but if you're struggling on the top/bottom it may help