Danchee Ridgerock Battery Relocation Tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Relocates the stock battery to the front Axle
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 80
- Wydruki
- 1
- Wyświetlenia
- 612
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Print using specs or don't, see if I care. ;)
You will need longer screws because this pushes the servo a little forward.
It's designed to use the stock Velcro strip to hold the battery in. Use CA glue to hold the two pieces together. Note the parts aren't Murphy'd the taper in both parts go towards the rear.
Featured on RoadsideRC Danchee Build:
NOTE: This is my model and original design, as is the same posting on Thingiverse, however, Thingiverse has not been able to help me reset my account after multiple attempts so I am importing everything manually to Printables.