Bolts for Circular Sock Knitting Machine (CSM)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I couldn't find the right sized bolts at my local hardware store - so I just modeled some up and printed them.
- Ocena
- 0 / 5
- Polubienia
- 31
- Pobrania
- 121
- Wydruki
- 0
- Wyświetlenia
- 917
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Since I didn't see the right size bolts to attach the CSM to a table at my local store I just modeled some up and printed them.
But - I also found the piece of plywood I was mounting my machine to was pretty iffy quality and drilling that big of a hole didn't seem likely to work out well. So I also made a set of pins to temporally hold the machine in position with the 5mm holes I used to mount the router template used to cut the plywood.
The pins actually worked better than I expected and didn't break…but don't hold the machine nearly as well as real bolts do. But they were suitable for initial testing.
I printed them at .20 with no support. Head of the bolt to the build plate and “Washer” side of the nut down.
Hope someone finds them useful.