Ender 3 S1 Filament Sensor Housing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ender 3 S1 Filament Sensor Housing allows for printing from a drybox instead of a spool.
- Ocena
- 5 / 5
- Polubienia
- 33
- Pobrania
- 184
- Wydruki
- 1
- Wyświetlenia
- 1746
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This parametric model was inspired by the excellent design by @alpo16000. This model for the Creality Ender 3 S1 allows you to move your filament from the top of the printer to a separate spool holder or drybox. It can be mounted on either the left or right side of the printer, whichever meets your needs.
A few changes from the original model include a more robust design since the original version broke, holes are now threaded for the PTFE fittings and the filament runout sensor mounting screws, and a fully parametric design that allows you to make changes to suit your needs and printer's “personality” (see the Change Parameters section in Fusion 360 and season to taste).
Although PLA should work fine, I suggest printing with a stronger material such as PETG/ABS/PA with infill settings of 35% or better.
Also, don't over tighten the PTFE fittings since they can crack the housing if turned too much. Finger tight is perfect.
I used this kit from Amazon since it had all of the fittings and PTFE tubing needed for this upgrade. It works perfectly, allowing me to keep my filament dry and print directly from my heated filament dryer.
Good luck and happy printing!