1 / 3
Holder for brass wool for Weller soldering iron holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple Brass wool holder for cleaning a soldering tip. It replaces sponge from the soldering iron holder WELLER KH 04.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 46
- Wydruki
- 1
- Wyświetlenia
- 456
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (18)Powiązane
Recommended settings
| Material | PLA or PETG (for higher melting point) |
| Nozzle | 0.4 mm |
| Layer height | 0.2 mm for 0.4 mm nozzle |
| Orientation | upper part: top down lower part: bottom down |
| Infill | 15% |
| Prusa profile | “0.2 mm Quality” |
| Extra settings | none |