1 / 2
PIR HC-SR501 IR Sensor Enclosure for Arduino and Raspberry Pi — zdjęcie 1
1 / 2

PIR HC-SR501 IR Sensor Enclosure for Arduino and Raspberry Pi

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Orientacyjna cena wydruku pliku

0,22 € – 0,26 € netto (bez VAT)

Dla pliku: PIR Case Bottom.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 0,24 € netto (środek widełek).

Masa podana przez autora
3 g
Czas druku podany przez autora
14,4 min
Materiał u źródła
PLA
Materiał wyceny
PLA
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

Small enclosure for PIR Infrared Motion Sensor

Ocena
0 / 5
Polubienia
11
Pobrania
94
Wydruki
0
Wyświetlenia
836
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial

Small enclosure for a HC-SR501 PIR Infrared Sensor. 

Enclosure includes notch for use with a small cable tie to secure the cable so it won't pull out. Additional hole below the sensor hole is for an optional LED if you want to add one to indicate sensor activation. 

There is also an optional cover for times when you want to disable the sensor - just cover the front. Cover stores on the back of the cube when not in use. 

Printed in PLA with 0.4mm nozzle, 0.2mm layer height, no supports. gcode files are for Prusa MK3.

Secure the sensor in the cube with #4 screws, secure the back with #2 screws. 

Tagi