Divider Bracket for Ikea Helmer Drawers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted a minimalist way to divide the drawers and decided to utilize the holes at the folded edges of the drawers.
- Ocena
- 4 / 5
- Polubienia
- 5
- Pobrania
- 43
- Wydruki
- 1
- Wyświetlenia
- 419
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
I wanted a minimalist way to divide the drawers and decided to utilize the holes at the folded edges of the drawers. These divider brackets sit inside the drawer gaps which keeps them from tipping over or sliding down the drawer. I cut hardboard (1/8 in) to act as the actual dividers.
The entire model is thin. I printed these in PLA with 3 walls, .3mm layer height. The back piece is only 3 layers thick but seems strong enough for this task. These print practically solid. There is a full and a light version where I cut holes in the side pieces to save print time and filament.