1 / 1
LUX Vape Pen Stand and Cartridge Storage Honeycomb
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This remix adds two large honeycombs on either side to hold LUX vape pens. They have a diameter of around 14.5 mm.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 132
- Wydruki
- 1
- Wyświetlenia
- 575
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (18)Powiązane
This remix adds two large honeycombs on either side to hold LUX vape pens. They have a diameter of around 14.5 mm.
The center honeycombs are unmodified and are still around 11 mm in diameter.
I printed this at 0.2 mm layer height with Hatchbox Yellow PLA filament. I've included gcode files for Hatchbox and Prusament PLA as well.