1 / 3
FormD T1 M19 Ethernet Gasket for EGPL-T101
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Trade a M.2 NVMe slot for 10GbE networking!
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 1951
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 2)Remiksy (0)Kolekcje (12)Powiązane
This utilizes one of the M19 threaded ports on the FormD T1 to add 10 Gigabit Ethernet using the Innodisk EGPL-T101 M.2 module.
Use M3 screws to attach the ethernet port to the gasket.
Make sure the screw head does not protrude past the plastic, otherwise you risk scratching your case during final installation.