Elevated Track Towers for Temporary O Gauge Model Train Layouts.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a modular elevated track system for O gauge model train track. This is intended for temporary track layouts.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 65
- Wydruki
- 0
- Wyświetlenia
- 889
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This is a modular elevated track system for O gauge model train track. This is intended for temporary track layouts. It is easy to assemble and disassemble so that the supports can be stored compactly when not in use. The supports are intended to be used with an existing trestle system but they can also be used by themselves if you are willing to elevate the whole layout.
Print instructions
Unassociated tags: model train bridge, O Gauge, O Scale
Category: Hobby Summary
This is a modular elevated track system for O gauge model train track. This is intended for temporary track layouts. It is easy to assemble and disassemble so that the supports can be stored compactly when not in use. The supports are intended to be used with an existing trestle system but they can also be used by themselves if you are willing to elevate the whole layout.
Print Settings
Printer Brand: Prusa
Printer: I3 MK3S
Rafts: Doesn't Matter
Supports: No
Infill: 20%
Filament: Hatchbox PLA
Notes:
I occasionally had problems with the clip not adhering to the print bed well enough. If you have problems with this I would recommend printing with rafts.
Post-Printing
Assembly
To assemble, put the larger end of the tower into the base, and then put the clip on top. No glue or screws are required. It works best to put one of these at every joint in the track.