Fiber Punk Node Pro Mounting Enclosure with Flip Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fiber Punk Node Pro Mounting Enclosure with Flip Cover to work with the Prusa node box.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 413
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Update: I sent the piece of junk back to Amazon. Wifi connects really easy but the rest was a nightmare. One printer wont read the fake SD card but will home the printer, the other printer, did read the SD and would start the print, tilt the UBL and then say print completed. This may be the greatest thing since sliced bread, but mine was moldy. It's going back today. Wont turn down that street again I can tell you. I spent damn near 12 straight hours working with it.
UPDATE: I just added a version that has the ledge below the MicroSD slot so you can get your finger in easier to eject it. Side by side pic shows the lowered V4 version on the left.
The enclosure stl that is listed in the tutorial was a train wreck so I made one to work with my elevated Ender 3 style. The stock Node Box doesn't even work with the stl in the documentation anyway. I made a flip lid for easy access. I included gcodes and 3mf's so you can see how I setup the Box Modifiers for the different infills. Let me know if you need something changed. A 5mm nut presses into back side of main box. Mount over the electronics box of the Ender. Prusa Node box simply snaps in and out. now using a M5x10mm attach the flip cover. Now flip to access and return to use.
Here is the Prusa Cover I used.
https://www.printables.com/model/210136-fiber-punk-node-prusa-shell-remixed
Flip Lid takes 2hrs and 19min, and Main Box takes 3hrs and 44min to print.