1 / 6
Haul Truck 40mm (DumpTruck)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A tiny haul truck commonly used in open pit mining. Movable wheels and bed, designed to be printed all together.
- Ocena
- 4 / 5
- Polubienia
- 417
- Pobrania
- 2815
- Wydruki
- 1
- Wyświetlenia
- 9536
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 9)Remiksy (0)Kolekcje (650)Powiązane
A tiny haul truck commonly used in open pit mining. Movable wheels and bed, designed to be printed all together.
UPDATE:
I would suggest printing this model at 2x scale. The fine details print much better and so far my son hasn't broken the wheels yet. If you are print on a printer that is less accurate the 2x scale jump will help with initial movement of the wheels and hinge.
Print instructions
- This 3d print needs a well tuned 3d printer to have a successful print.
- Print with 100% infill or else you might find the wheel axles are hollow and not strong enough.
Tips
- If printing from a slicer other than PursaSlicer, make sure you are not 3d printing the support enforcer as geometry.
- Once the wheels are free to move, a little bit of lube in the axles will stop them from squeaking and roll very smooth.
- A small sharp knife would be very useful to help cleanup the necessary infill quicker.
If you have any suggestions or tips on printing complicated parts like this let me know.