1 / 1
Soda Stream Fizzi Base with hole for C02 hose — zdjęcie 1

Soda Stream Fizzi Base with hole for C02 hose

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Soda stream Fizzi base to allow for C02 hose to come out the bottom without needing to drill a hole in the back cover.

Ocena
0 / 5
Polubienia
1
Pobrania
23
Wydruki
0
Wyświetlenia
284
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Public Domain

I quickly whipped up this base for a soda stream fizzi model. The goal was to have an extension on the bottom that allowed a C02 hose to connect to a larger tank. I could have just left the back off or drilled a hole in it, but what is the fun in that? The fit is a little snug so place the front of the machine in the groove first and the rest will squeeze in.  I attached the step file if someone wants to make it better. My hose needed to go out of the RIGHT side, but you can just mirror the STL or modify the step to make it go out of the right side.

Print Settings:
PLA 0.2mm
15-20% infill (you dont want the grove to crack under pressure, so do atleast 3 perimeters)
Use supports (from bed only).

Tagi