Da Tul - GoPro Thumb Screw Wrench, Micro SD Card Holder, and Bottle Opener
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D printable version of GoPro's The Tool thumb screw wrench with the added benefit of holding an extra micro SD card
- Ocena
- 5 / 5
- Polubienia
- 27
- Pobrania
- 135
- Wydruki
- 6
- Wyświetlenia
- 740
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Background
Da Tul is a 3D printable version of The Tool, a product made by GoPro to tighten the thumbscrews used on GoPro mounts and accessories. I was able to add a compartment to the design to house an extra micro SD card - a feature that the original product doesn't have while still maintaining a similar form factor.
STLs
I've made 2 versions of Da Tul available:
- SD Card Version (2 STLs)
- Da_Tul_SD_card_faceplate
- Da_Tul_SD_card_wrench
- Single Piece Version (1 STL)
- Da_Tul_wrench_single_piece
Print Instructions
Print the parts face down without supports with the following settings:
- Infill: 30% (or more)
- Layer Height: 0.15mm (or less)
I used PLA, but PETG will hold up better longterm. These cost roughly $0.25 to print, so you can always print off another one when you need it.
The Latching Mechanism
Please review the end of the YouTube video (see below) for a demonstration on how to make revealing the SD card easier. You need to apply downward pressure towards the back of the piece so that it will release more easily.
YouTube
I documented my design process on YouTube. I went through over 10 different iterations before arriving at this design. I'm providing these files for free rather than placing them behind a paywall - all that I ask in return is for you to consider subscribing to my YouTube channel to help us grow!