1 / 3
Pico 4 USBc Splitter Holder 3.5 Headphone and Power Passthrough — zdjęcie 1
1 / 3

Pico 4 USBc Splitter Holder 3.5 Headphone and Power Passthrough

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Attach a USBc splitter to the PICO4 without dangling cables. Easy to attach and easy to print.

Ocena
0 / 5
Polubienia
13
Pobrania
92
Wydruki
1
Wyświetlenia
909
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

I was inspired by LWCs splitter adapter approach, but had I few ideas of how to make a version that is easier and faster to print in different materials and is (marginally) lighter. Also I prefer long clamps on the thin part of the headstraps over the claws that grab the edges only. Since the tolerances of LWCs holder did not work for printing or attachin it when not printed in TPU I built my version from scratch.

UPDATE: Added a 30 degree version to allow more wiggle room and more flexibility in cable management. Its a matter of personal taste really, both versions do work. 

########################################

  I use the exact same splitter from amazon: https://www.amazon.de/gp/product/B09ZLKX64S

########################################

Optional you might want to use a 90° USBc adapter to achieve a cleaner look. 
Like: https://www.amazon.de/dp/B0B77CJD7T


 

Tagi