1 / 2
HMG7 BMG BMG-M Rear Mount with drag chain connector
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Drag chain end-piece to be screwed to the BMG-M Rear Mount, allowing the use of a drag chain on your printer
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 430
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Drag chain end-piece to be screwed to the BMG-M Rear Mount, allowing the use of a drag chain on your printer. I didn't create other variations since to me it is the one that makes the most sense to be used.
No heatsets required, just two short SHBC bolts that connect from the bmg mount to the chain end-piece