Bertie the Bus face and battery cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bertie the Bus from Thomas the Tank Engine
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 364
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The original face and battery cover had been lost from the toy so I remade them using reference images from online and the show.
The pegs on the back of the face line up with the holes on the front of the bus and it doesen't need any glue to stay in place.
There is a small flat area on top of the face allowing it to be printed verticaly so the face is upside down(top of the head on the print surface).
The battery cover should be printed on its side to allow the clip to flex.
The face doesen't need support but the battery cover needs a little where the flexable clip is.