Terraonion MODE Sega Dreamcast Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a plate for mounting the Terraonion MODE to a Sega Dreamcast.
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 223
- Wydruki
- 0
- Wyświetlenia
- 2392
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a plate for mounting the Terraonion MODE to a Sega Dreamcast. It uses the three existing disc drive screws to mount the plate to the Dreamcast. Four additional screws are needed to attach the MODE itself to the mount. The MODE mounting holes are 2.5mm wide and 6mm deep, and intended to be self threaded when the screw is first inserted. I have also included a file for a washer that can be used with the screws. The washers aren't really necessary, but will protect the plating on the MODE from getting scratched.
The plate fits in a stock Dreamcast, but also fits with things like the Noctua fan mod.
Print instructions
Rafts:
No
Supports:
Yes
Resolution:
0.20 mm
Infill:
15%
Filament_brand:
PRUSAMENT
Filament_material:
PETG
Notes:
A small support is recommended for the top left corner. There is a small cutout on the bottom of the base to allow clearance of the metal plate of the Dreamcast. It does print without supports, but will look better with them. I have printed it out using Prusament PETG, and 3DFuel Pro PLA and both work perfectly fine. It should work with whatever filament that is suitable for low stress mechanical applications.