Sony PVM/BVM Pull Bar
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I picked up a Sony PVM-20M2MDE that had some external damage to one corner.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 597
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
I picked up a Sony PVM-20M2MDE that had some external damage to one corner. It was missing one of the pull bars, so I designed up something to attach to the monitor so it looks a bit more balanced when I finished with the other repairs.
It's meant to be held in with epoxy, so remember its only for aesthetics and wont offer much strength.
It should fit most 20" PVM/BVM's, but if not you can resize or edit the file to fit your needs.
STL and Step files included
Print instructions
I printed in resin, but it should work fine on pretty much any printer. Just make sure to print with 100% infill and get the orientation right.