D20 Dice - 1 inch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
1 inch sides. 1.6 inch overall diameter d20. Designed to be printed from flexible TPU to be safe for children to roll…
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 257
- Wydruki
- 3
- Wyświetlenia
- 838
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution
1 inch sides. 1.6 inch overall diameter d20. Designed to be printed from flexible TPU to be safe for children to roll safely, but works well as PLA too at 100, 150, or 200% scale.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
.4mm nozzle x .15mm layer
Infill:
gyroid 15% minimum; .8mm minimum walls
Filament: any TPU, PLA any
Notes:
Print with gyroid to get the most balanced rolling. If printing from TPU, the best squish is achieved with .8mm walls and 15% infill. I printed these with a Ender 3 with a direct-drive modification. the PLA version prints fine on a standard Ender 3 with a bowden setup.
Category: Dice