Two-Color Cassette Tape Keychain (No MMU Required)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An experiment with multicolor single extruder printing in the shape of my favorite audio format
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 66
- Wydruki
- 1
- Wyświetlenia
- 563
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial
This model was designed for a technique similar to the one here:
Basically, the idea is to print one color, leave it on the bed, then print the next color around it. You'll probably have to do it as two separate gcode files, that's what I did.
Just make sure the two STLs are lined up in your slicer, then delete one before you slice. Then after you export the gcode, undo and delete the other part before slicing again.

Obviously, it's worth double checking and watching the print, at least for the first few layers.
I set the infill for the black print to concentric to make it look more like tape. I also turned off thick bridges and set the infill to 100% for the clear print.