1 / 3
Black Sheep - Toilet Paper Holder - no supports
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of the Black Sheep - Toilet Holder - no supports
- Ocena
- 4,813 / 5
- Polubienia
- 158
- Pobrania
- 471
- Wydruki
- 18
- Wyświetlenia
- 3127
- Oceny
- 16
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (8)Wydruki i komentarze (Wydruki: 18) (Komentarze: 26)Remiksy (3)Kolekcje (182)Powiązane
Remix of the Black Sheep - Toiled Paper to use much less material and can be printed without any supports
Updates:
- 26.01.23 - Version V2: Single STL for small and big beds - use split to objects for small beds (<300mm)
Changes:
- The body can be printed without any supports and much less material
- For 12cm diameter rolls (feel free to text me if any other diameter is wished =))
- Minor changes on the feet
- Head attachment a bit more “nice”
Two halves version (V1):
- If you have a hard time gluing the two halves together, print the body-enforcement.stl. Print one just for the back or two for the front and back
Print recommendations:
- no supports
- 0.2/0.3mm layer height
- 3 Walls/Perimeters
- 5 Bottom/Top Layers
- 18-20% Infill (Legs without infill)
- For multicolor head, change color on layer 16 and 21 (for 0.2 layers)