Improved hemera 5015 fan duct
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A remix of @Print-3D's original design (no longer available) NEW VERSION AVALIBLE (see description)
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 151
- Wydruki
- 0
- Wyświetlenia
- 1011
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
New Version Avalible
https://www.printables.com/model/976980-hemera-cooling-duct
The new version takes lessons learned from this model and incorperates a better duct design and saves space while supporting BL-TOUCH and CR-TOUCH probes. (works with 5015 Silencer)
----------------------------------------------------------------------------------------------------------------
Update notes (2024/08/18)
This model is at End of life.
You can still download it, modify it, etc. I won't be working on this design anymore
Description:
this model fits onto an existing E3D hemera, using 3 hardpoints on the toolhead and blowing air under the nozzle
UPDATE NOTES (for version 2)
- made mounting holes adjustable
- optimized downward flow
How to install:
Use 3, M3x6 or M3x7 bolts to secure the shroud to the hemera. check alignment and install the 5015 blower fan with a M3x20 screw, the screw will cut it's own thread.
Printing:
Use a high temperature material like ASA, ABS, or nylon. don't go crazy on infill.
IF USING PLA:
Be warned that the shroud will deform over time, set an idle fan speed of 20% when the hotend is at printing temperature, otherwise it will droop and collide with your parts.
Keep in mind that the original design is no longer available, it appears to have been removed from printables, let me know if you need the documentation for the original design.