Dovetail "nano" Gridfinity base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Standard Gridfinity with a dovetail connection detail. Minimalist with a twist.
- Ocena
- 4,692 / 5
- Polubienia
- 102
- Pobrania
- 662
- Wydruki
- 14
- Wyświetlenia
- 3135
- Oceny
- 13
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Standard Gridfinity with a dovetail connection detail. Minimalist with a twist. As with my other dovetail models, no tools or fasteners required. These have a small bump bar in them to “grip” the bin/tray inserted into them; friction fit, not exactly a vise hold by any means. Re-mix to omit if you'd like.
If you print supports under the voids, I recommend using a small blade from the end if they don't just pop out. If you pry from the long side, the base wall may deflect.
Edit 3/29/23:
Added .stl files without the grip bars in the bottom.
Edit 6/27/23
Added .stl files of 1x2, 2x1, 2x3, 3x2, and 3x3 with and without grip bars by request.
Edit 12/29/23
Added spacer and butterfly files by request.