1 / 2
PotterUSA - Generic Texture Plate Box (190 x 55 x 11) — zdjęcie 1
1 / 2

PotterUSA - Generic Texture Plate Box (190 x 55 x 11)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Thin Storage Box for the average PotterUSA Texture Plate (190mm x 55mm x 11mm)

Ocena
0 / 5
Polubienia
1
Pobrania
50
Wydruki
0
Wyświetlenia
704
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial

Thin Storage Box for the average PotterUSA Texture Plate  (190mm x 55mm x 11mm)
 

This can be printed in any filament you need, but I've used PLA and PETG with no issues.  It is just a storage box but shaped specifically for the texture plates sold by POTTERUSA for providing texture to metal with a rolling mill.  

In order to prevent rust you can always lube or wipe the plate down with froglube.

the plate is 11mm tall internally to provide for the “bend” that develops in the plates during production and/or use.   if they are flat plates, you could almost store two inside one box with a piece of brown craft paper between them to prevent scratches and dents.
 

I usually print mine with layers heights of .24 and infill of 10 using the appropriate temps for the filament you've chosen.

Tagi