Tool Station - All in one tool organizer using prusament spool

This is the ultimate tool station for all 3d printer and other tools. The bottom spool is used to hold all the open-end spanners and top is used to hold screwdrivers, drills and every other 3d printing tool.
The honeycomb design of prusament is useful here for hanging screwdrivers, nozzle and some allen-keys.
With addition storage unit on top you can store as many drills, screwdrivers, hex-keys, 6-pen drives, 12-memory cards, spatuala, pliers, cutters etc........

Here is the link to prusament spool I printed and used.
https://www.thingiverse.com/thing:3429541/files

Leave a comment for any update in the design.

Print instructions

No special settings required.
Sharing the settings I used...

Print Profile - 0.3mm Draft @MK3
--Updates in the Stock profile--

Recommended -
Plater Tab
-Supports: None
-Infill: 0% (Except for storage top)
Print Settings - Advanced - Extrusion Width
-First Layer: 0.6

Optional -
Print Settings - Speed
-Perimeters: 60 mm/s
-Infill: 200 mm/s
-Solid Infill: 200mm/s
Printer Settings - Extruder 1 - Retraction
-Lift Z: 0 mm

You will need only these printed parts:
1 x Spool
1 x Hex_bar_assembly
1 x Spool_mount
1 x Spanner pallet
(Optional) 1 x Storage_top 1 | Storage_top 2 | Storage_top 3
(Optional) 6 or more X Extension pins

Assembly Instructions (see photos)
Step 1: Assemble the Hex bar using hex bar pins.
Step 2: Screw the hex bar into a spool mount.
Step 3: Press the spanner pallet into one of the spool this spool will be used as the bottom spool.
Step 4: Screw the hex bar to top and bottom spool mount.
Step 5: (Optional) glue any storage top design or your own design to the top spool.
Step 6: Arrange all tools and you are done !!

Good Job!!
Congratulations.

You can Support me by making a small donation:

https://www.paypal.me/sharad1209