Extruder faces!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are some lightweight covers for the etruder motor that gives your I3 printer some more personality!
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 153
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
This cute little stepper cover with some og emoji faces on them are a perfect way to spruce up your printer just a little bit!
To print these yourself you have to slice the Cover body and face seperately both at 0.2mm layer height and make sure to center them so that they print at the same place and line up with eachother (the body model should also be sliced with a z-hop of 0.3mm).
After you've sliced your models first print the face in whatever color you like and when it's done DO NOT REMOVE THE PRINT. Instead change filaments to a contrasting color and then print the body ontop of the face, this creates a perfectly inset design on your print that looks really clean, I used a textured bed to blend the colors together better because i like the look however this should work perfectly fine with a smooth bed aswell if you want a more reflective or smooth finish or you have adhesion issues printing things this tiny.
installing the face i just used a little double sided tape to keep it in place but still have it be removable just in case
If you have any questions or anything like that in the creation of either the model or how you print these feel free to ask them! Happy printing.