Snapmaker A350 Laser bed Product Aligner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Eliminates the need for repetitive product/laser alignment when you have a batch of the same items to laser
- Ocena
- 0 / 5
- Polubienia
- 32
- Pobrania
- 203
- Wydruki
- 0
- Wyświetlenia
- 807
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This alignment piece will help you achieve the same result time and time again if you have a batch of the same products to laser etch, one after the next. This will allow you to set the origin once, laser the product, set new product in laser aligner, start laser again with no need to adjust the origin. Things to note, the fixed part slots into the rectangular cut outs on the laser bed and is then screwed into the platform along with the laser bed. The moveable part is held in place with the standard rubber bungs provided by Snapmaker.